基于支持向量回归的动力电池参数辨识

根据铅酸蓄电池在放电过程中内部电化学反应导致外部电特性变化的特点,提出一种基于支持向量机原理的电解液密度辨识模型。利用支持向量机理论非线性回归的特性,简化测量电解液密度的过程,在恶劣环境下检测动力电池的电解液密度更显其优越性。预测实验表明,采用改进的交叉验证预测模型具有泛化能力强、稳定性好的特点,并且在小样本的条件下能达到预期的辨识精度。     

基于优化支持向量机的人脸表情分类

分析了支持向量机（support vector machine, SVM）目前主要存在的问题和参数选择对分类性能的影响后, 提出了以改进粒子群算法优化SVM关键参数的优化SVM算法。将加入拥挤度因子的微粒群算法引入到SVM中, 在不牺牲泛化性能的前提下, 对其参数进行优化, 增加了SVM初始化参数的多样性, 减慢了局部搜索, 促进其在全局范围内的寻优搜索, 以有效克服SVM算法过分依赖初始值和容易陷入局部极小值的缺点, 并利用由粗到精的策略构造多层SVM人脸表情分类器, 在提高准确率的基础上加快分类的速度。实验证明, 新算法具有速度快、准确率高的优点。     

基于概率支持向量回归的产品设计时间预测模型

为使产品设计时间预测既克服小样本、异方差噪声问题,又提供除预测值以外的其他有用信息,建立概率支持向量回归(PSVR)模型。首先,在异方差回归模型基础上设计概率约束条件,以使预测值以较大概率位于真实值的某邻域,结合具有参数不敏感损失函数的支持向量回归确定优化目标,提出PSVR。然后,将最大完工时间知识嵌入进PSVR的约束条件,用以确定真实值邻域的宽度,将交叉验证与遗传算法相结合以确定PSVR的相关参数。最后,以注塑模具设计的实例进行分析,结果表明基于PSVR的时间预测方法可同时提供有效的预测值和预测区间。     

Measurement of soybean fatty acids by near-infrared spectroscopy: Linear and nonlinear calibration methods

A key element of successful development of new soybean cultivars is availability of inexpensive and rapid methods for measurement of FA in seeds. Published research demonstrated applicability of NIR spectroscopy for FA profiling in oilseeds. The objectives of this study were to investigate the applicability of NIR spectroscopy for measurement of FA in whole soybeans and compare performance of calibration methods. Equations were developed using partial least squares (PLS), artificial neural networks (ANN), and support vector machines (SVM) regression methods. Validation results demonstrated that (i) equations for total saturates had the highest predictive ability (r ²=0.91–0.94) and were usable for quality assurance applications, (ii) palmitic acid models (r ²=0.80–0.84) were usable for certain research applications, and (iii) equations for stearic (r ²=0.49–0.68), oleic (r ²=0.76–0.81), linoleic (r ²=0.73–0.76), and linolenic (r ²=0.67–0.74) acids could be used for sample screening. The SVM models produced significantly more accurate predictions than those developed with PLS. ANN calibrations were not different from the other two methods. Reduction in the number of calibration samples reduced predictive ability of all equations. The rate of performance degradation of SVM models with sample reduction was the lowest.     

Shear-rate dependence of first normal stress difference of poly(isoprene-b-styrene) in solution near the order-disorder transition temperature

Viscoelastic properties of poly(isoprene-b-styrene) in dioctylphthalate under steady shear flow were measured near the order—disorder transition temperature. In ordered states, first normal stress difference N₁ is proportional to shear rate at low region, but becomes proportional to at the high region, similar to the N₁ behaviour of polymer blends undergoing shear-induced homogenization. Because the existence of microdomains was confirmed at the high region by the flow birefringence method, it is concluded that the above N₁ behaviour is not caused by shear-induced homogenization, but is probably caused by the shear-induced alignment of the microdomain structure.     

混合SVM结合信息熵检测ICMP隐通道*

攻击者可以将生成的任意信息隐藏在ICMP的有效负载中传递出去,构成了ICMP负载隐通道。在分析ICMP数据流熵标准差和熵值分布特性的基础上,提出了基于信息熵的样本集缩减策略。为提高采用标准支持向量机(SVM)的学习能力与推广能力,建立了若干选取规则,构造出一种有效的混合核函数。最后采用混合SVM结合信息熵的方法检测ICMP隐通道,取得了较快的分类速度和较高的检测率。实验结果表明,采用混合SVM结合信息熵检测ICMP隐通道的方法,是有效的、可行的。     

基于简易支持向量机的客户流失预测研究*

应用简易支持向量机（SSVM）进行客户流失预测,以提高机器学习方法的预测能力。以国外电信公司客户流失预测为实例,与最近邻算法（NPA）进行了对比,发现该方法在获得与NPA近似准确率的条件下,所花费的时间和时间增加值远小于NPA,是研究客户流失预测问题的有效方法。     

Fault-Diagnosis Method Based on Support Vector Machine and Artificial Immune for Batch Process

A new fault-diagnosis method to be used in batch processes based on multi-phase regression is presented to overcome the difficulty arising in the processes due to non-uniform sample data in each phase. Support vector machine is first used for phase identification, and for each phase, improved artificial immune network is developed to analyze and recognize fault patterns. A new cell elimination role is proposed to enhance the incremental clustering capability of the immune network. The proposed method has been applied to glutamic acid fermentation, comparison results have indicated that the proposed approach can better classify fault samples and yield higher diagnosis precision.     

具有两类失效状态和休假的串联可修系统

研究了修理工可多重休假的部件串联可修系统,每个部件有两类失效状态。假定部件寿命服从指数分布,部件修理时间和修理工休假时间均服从一般连续分布,利用向量Markov过程理论和Laplace变换的方法求出了系统的可靠性指标。     

PSO-SVM模型的构建与应用

为了使支持向量机(SVM)获得更好的分类效果,针对人为选择参数的随机性,提出了利用粒子群算法(PSO)进行参数自动选取的优化方法,构建了PSO-SVM模型.在个人信用评估中,通过对粒子适应度函数的设置来控制造成较大损失的第二类误判,应用结果表明:模型在训练和测试样本中的分类精度可以达到95%,第二类误判率分别仅为0.78%和2.02%.利用PSO对SVM中的参数进行优化,可以避免人为选择的随机性,并且在解决分类问题中表现出较好的稳健性.